Heat Exchanger Manufacturers

Exhaust Gas Heat Exchangers

Bowman Exhaust Gas Heat Exchangers are designed to remove heat from the exhaust gas side of engines and transfer it to the water circuit.

These Exhaust Gas Heat Exchangers therefore enable waste heat recovery, and can be used on Cogeneration/Combined Heat and Power (CHP) equipment up to 1 MW.

Bowman Exhaust Gas Heat Exchanger

Our Exhaust Gas Heat Exchangers are constructed with stainless steel tubes, tube plates and body and cast iron end covers which allows use with Biogas, Diesel Gases and Natural Gases.

When used in conjunction with other Bowman units such as: Header Tank Heat Exchangers, Charge Air Coolers and Bowman Oil Coolers. It is possible to reclaim up to 60% of lost heat from the engine. See opposite for a leaflet including Technical Specifications and Heat Recovery Performances.

These units can also be used to reduce the exhaust temperature in engines operating in hazardous environments where for safety reasons it is necessary to reduce the temperature of the exhaust gases.

Bowman Exhaust Gas Exchangers are manufactured to a standard range of sizes, they are competitively priced and offered on a quick delivery to meet your build schedules.

Bowman 15 inch Gas Heat Exchanger

A NEW Type 15" diameter Bowman Exhaust Gas unit has been introduced to the current range. When combined with Bowman’s other heat exchangers and coolers, the amount of energy that could be recovered from an engine’s jacket water, engine oil, turbo charger air and exhaust gases could amount to over 1000kW (1MW) of thermal energy – depending on engine size and power outputs.

See Press release on above

For further information on Exhaust Gas Heat Exchangers contact our Sales Office:

Tel +44 (0)121 359 5401 or 

Email info@ejbowman.co.uk

or go to our Stockist Page and click on your country to find your nearest stockist of this product.